Tuk Tuk
序号Serialnumber | 项目名称 Project name | 参数paramneter | |
技术参数 technical parameters | 整车尺寸 Overall dimensions | 3435X1375X1850mm | |
额定乘员 Rated capacity | 7人 /7people | ||
轴距 Wheelbase | 2720mm | ||
轮距 track width | 1200mm | ||
最小离地间隙 Ground clearance | 205mm | ||
最小转弯半径 Minimum Turning Radius | 4.5m | ||
最大运行速度 Maximum operating speed | 60km/h | ||
最大爬坡度 Maximum Gradability | 25% | ||
整备质量 curb weight | 450kg（不含电池） Excluding battery | ||
额定载荷 curb weight | 500kg | ||
续驶里程 range | 150km | ||
充电时间 Chargeing time | 8小时 8Hours | ||
电气系统electrical system | 电机 motor | 72V4500W交流异步电机 60/72V4500W AC asynchronous motor | |
控制器 Controller | 72V4500W交流异步控制器 60/72V4500W AC asynchronous motor | ||
电池 Battery | 72V150AH磷酸铁锂电池 72V150AH Lithium Iron Phosphate Battery | ||
充电器 charger | 车载式智能全自动充电器 Vehicle-mounted intelligent fully automatic charger | ||
灯光及信号 Light and Signal | LED大灯、左右转向灯、刹车灯、行车灯、仪表、电喇叭、倒车喇叭。 LED Headlights, Left and Right Turn Signals, Brake Lights, Running Lights,Instrument (Panel), Electric Horn, Reverse Horn | ||
底盘系统electrical system | 车架 frame | 整体焊接车架+酸洗磷化电泳烤漆 Integral Welded Frame + Acid Pickling, Phosphating, Electrophoretic Coatingand Baking Paint | |
动力传动 power transmission | 后置驱动,配备前进和倒档 Rear-Mounted Drive, Equipped with Forward and Reverse Gears | ||
转向 Steering System | 龙头把式转向机构 Handlebar-Type Steering Mechanism | ||
悬架 Suspension | 前悬架：加粗双摇臂弹簧式前叉 Front Suspension：Double wishbone spring fork | ||
后悬挂 Rear suspension | 汽车级球笼式独立减震传动系统 Automotive-Grade Constant Velocity (CV) Joint-Type Independent ShockAbsorption Transmission System | ||
制动 Braking
| 前后三轮鼓式液压制动 + 脚踏机械驻车制动 Front and Rear Three-Wheel Drum-Type Hydraulic Brakes + Foot-OperatedMechanical Parking Brake | ||
轮胎 tyre | 前轮：125/65—12 后轮：125/65—12 Front Wheel：125/65—12 Rear Wheel：125/65—12 | ||
车身配置Body configuration | 油漆 Paint | 高级汽车专用油漆 High-Grade Automotive-Specific Paint | |
车体 Vehidle Body | 钢制车架+一体冲压成型车体 Steel Frame + Integrally Stamped Vehicle Body | ||
仪表台 IP | 注塑成型仪表台，电门锁，仪表，组合开关 Injection-Molded Instrument Panel, Electric Door Lock, Instrument (Gauge),Combination Switch | ||
座椅 Seat | 注塑底板发泡海绵皮革软座椅+靠背 Soft Seat with Injection-Molded Base, Foam Sponge and Leather + Backrest | ||
Specifications and details are subject to change without notice.
The main beam of the frame is made of 40X80MM square tubes with a thickness of 3MM, and is equipped withan independent suspension rear axle,ensuring comfortable riding and emphasizing safety.
Lights and signals: The front headlights, front and rear turn signals, side turn signals, and combined rear taillightsare all LED, and are equipped with an electric horn and a reverse buzzer.